Cleaning ............................ 5 Setting up the expansion module ..................6 Delivery Content ........................6 Connecting the D3 to the Snom phone ................6 Connecting one D3 ......................6 Connecting a second and third D3 ................. 7 Connecting a wireless USB headset to the phone ............8 Getting to Know Your Expansion Module ................9...
Snom therefore disclaims all warranties and liability for the accurateness, completeness, and currentness of the information published, except in the case of intention or gross negligence on the part of Snom or where liability arises due to binding legal provisions.
Follow the instructions in this manual and other applicable documentation of the device. • For use with Snom D3xx phones with USB ports only. Do not connect the device to a PC or to other phones! • If the device is not supplied with power via the USB cable, use only a power adapter expressly recommended by Snom Technology.
• the separately available power adapter A6, Phihong model number PSM10R-050, is needed for the second module in the chain: ◦ With EU clip: A6, Snom PN 00004325 ◦ With US clip: A6, Snom PN 00004326 isposal of the device This device is subject to European Directive 2012/19/EU and may not be disposed of with general household garbage.
USB cable included in the delivery. The second module requires the separately available power adapter A6, Snom PN 00004325 (EU) or 00004326 (US). The third expansion module is supplied with power by the second module via the included USB cable.
Setting up the Expansion Module 4. Insert the type A plug of the included USB cable into the type A USB connector on the Snom phone and the type B plug into the type B USB connector on the D3 (Fig. 2) Fig.
D3 User Manual Setting up the Expansion Module Fig. 5 Fig. 6 1. Connect the second D3 to the first one, as shown in Fig. 3 and 5. 2. Attach the power supply to the second module, as shown in Fig. 5 and 6. 3.
For more information on the available functions and on how to program and use the keys, please refer to the phone's manual, chapter "Programming the Function Keys". You can download the manual at http://wiki.snom.com. isplay Layout Fig.
"Programming the Function Keys". You can download the manual at http://wiki.snom.com. 1. Open the connected phone's web interface. 2. Click on Function Keys in the menu on the left side.
Page 11
The function keys of the phone itself are numbered P1 - P12 on the D375 (Fig. 5) , P1 - P48 on the D345 (Fig. 6), and P1 - P5 on the D315, respectively. The 48 keys on the D345 are subdivided into the four "pages"...
2. Press "1" to open the Preferences menu. 3. Press "5" to open the Display menu. 4. On the D375 and D315 press "3", on the D345 press "5" to open the Expansion Modules menu. 5. Press "1" to open Appearance.
3. Press "5" to open the Display menu. 4. On the D375 and the D315 press "3", on the D345 press "5" to open Expansion Modules(Fig. 4). 5. Press 2, 3, or 4, respectively (Fig. 4), to adjust the backlight on activity (Fig. 5) or when idle or the contrast setting (Fig.
Fkeys menu as Keys on SXM 1-3 before the first D3. Depending on the number of Expansion Modules V2.0 connected to the phone, i.e., 0, 1, 2, or 3, the D3 Expansion Modules on the Function Keys page will be listed as follows: D375 and D315 Number of Expansion First D3...
D3 User Manual Configuring the Function Keys 4. Press the corresponding number to open the submenu Keys on UXM 1, 2, or 3, or scroll to it and press 5. Enter the number of the key [1 - 18] on the keypad or scroll down to it and press .
Page 16
D3 User Manual Configuring the Function Keys Expansion module 1 Expansion module 2 Fig. 2 - key mapping on expansion modules 1 and 2...
The XML tags of the function keys are an exception from the general rules for XML mass provisioning of settings for Snom phones because the tag for each key specifies the exact settings for that particular key. The format is as follows: <fkey idx="1"...
Phone user interface (Settings > 1 Preferences > 6 Fkeys). See also the NOTE on the next page. WUI: Web user interface (phone's web interface > Function Keys page) fkey idx: XML mass provisioning. See also "Function Key Index Ranges" on page 21 D315 D375 D345 fkey idx fkey idx fkey idx ..
Page 19
D3 User Manual Configuring the Function Keys D315 D375 D345 fkey idx fkey idx fkey idx Second D3 (UXM2) D315 D375 D345 fkey idx fkey idx fkey idx Second D3 cont'd Third D3 (UXM3) NOTE: In the submenus Keys on UXM [1-3] the keys are numbered the same way as...
Page 20
D3 User Manual Configuring the Function Keys in the info bar (Fig. 2). In the following example, key 9 on the first D3 is connected to a D375. Fig. 1 Fig. 2...
D3 User Manual Configuring the Function Keys Function Key Index Ranges These are the function key index (fkey idx) ranges on 3xx phones with USB ports for all Snom expansion modules: D375 D315 • Keys on phone • Keys on phone ◦...
Need help?
Do you have a question about the D315 and is the answer not in the manual?
Questions and answers