Active Calls; Hold; One Call On Hold; Holding Multiple Calls - Snom D345 User Manual

D345 User Manual
A
ctive calls

Hold

One call on hold

Press to put the ongoing call on hold. Held calls are indicated threefold:
◦
By the text on the display.
◦
By the slowly blinking line key.
◦
By the slowly blinking call indication LED.
You can now:
◦
transfer the held call blindly or with prior announcement - see
"Transferring calls" on page 54.
◦
receive and make calls and put other calls on hold.
Pick up the held call by pressing its line key or by pressing
while on hold, the call is terminated on your phone as well and the LED indicators are turned off.

Holding multiple calls

If you are in a call with one party and have one or more calls on hold or if there is more than one
call on hold, the symbol
between the active call and any call on hold. Up to 12 simultaneous calls are possible, if supported by
the PBX.
• In Fig. 1 and 2 the phone is in one active call with a second call on hold. Press the function key
underneath
• In Fig. 3, 4, and 5 there is one active call, and two calls are on hold. Press the function key
underneath
Fig. 1
Fig. 3
is available in the function key line. You can switch back and forth
/ to show the call not currently on screen.
to show the calls not currently on screen, one after the other.
Fig. 2
Fig. 4
again. If the other party hangs up
Active call indicated by the symbol
by the phone number of the other party (Fig. 1).
Held call indicated by the symbol
by the phone number of the party on hold (Fig.
2, 3, 4, and 5).
Fig. 5
55
Using the Phone
, followed
, followed