phone's bottom shell (shaded gray in Fig. 1). Place the snom 320 on an
even, horizontal surface that gives the rubber pads a secure grip. Do not
1
place it on carpets or other materials containing fi bers that could block the
air vents and cause overheating.
below), clip the cords into the appropriate slots on the footstand or, in the
case of the handset cord, on the bottom shell of the phone (Fig. 2).
Fig. 1
It is also possible to mount the snom 320 on the wall. In order to do this,
detach the footstand from the bottom shell and attach it in the appropriate
position for wall mounting, as described in steps 1 through 6, below.
(1)
damage the display and/or its hinge and that you do not drop the receiver. You
may want to hold the phone in your lap or have a second person hold it.
10 • Installation
Keison Products
www.keison.co.uk
[
S N O M
Setting up the Phone
Your snom 320 is delivered with the footstand attached to the
After connecting the phone (see chapter Connecting the Phone,
Wall Mounting
Turn the phone upside down (Fig. 3). Please ensure that you do not
sales@keison.co.uk
3 2 0 M
V 1 . 0 0 ]
A N U A L
Fig. 2
Tel: 01245 600560
Fax: 01245 600030