Table of Contents
Advertisement
D315 | D305 User Manual
Attaching for wall mounting
See "Appendix 3 - Wall Mounting" on page 88.
Detaching
Lightly press the snap-fits of the footstand inwards (Fig. 1) and, at the same time, tilt the footstand
backwards and lift it from its anchorage in the mounting holes (Fig. 2).
Fig. 1
R
otating the tab of the cradle
The phone is delivered with the tab level with the inner edge of the cradle (Fig. 1)-. If you are going
to mount the phone on a wall, we recommend that you rotate the tab 180°. After rotation, the tip of
the tab (Fig. 4) will protrude slightly above the edge of the cradle. The small rectangular hole in the
receiver casing fits perfectly over the now protruding tip, holding the receiver safely in place in the
upright position on the wall.
Fig. 1
1. Slide the plastic tab from the cradle (Fig. 2)
2. Rotate the tab 180°.
3. Slide the tab back into the cradle (Fig. 3).
The wall mounting instructions are attached at "Appendix 3 - Wall Mounting" on page 88.
Fig. 2
Fig. 2
Fig. 3
11
Setting up the Phone
Fig. 4
Advertisement
Table of Contents
