Table of Contents
Advertisement
Using AC Power (DC IN Power)
Use the supplied AC adapter to operate the camera
recorder with AC power.
POWER
2
ON
OFF
MODE
.
1 Connect the DC cable of the AC adapter to
the [DC] terminal of the camera recorder.
Check that the power switch of the camera
0
recorder is set to "OFF".
Open the cover of the [DC] terminal and
0
connect as shown in the diagram.
2 Hold down the lock button (blue) at the
center of the [POWER ON/OFF] switch to set
to "ON".
Power will be supplied to the camera recorder.
Caution :
Do not insert or remove the DC cable during
0
recording.
Do not use power supply of high voltage
0
fluctuation, containing noise such as ripple, or
with insufficient capacity.
Charging the Built-In Battery
The date/time and time code data are stored
0
using the built-in rechargeable battery.
When power is connected to the camera
0
recorder, the built-in battery always gets
charged. When the power is disconnected, the
battery gradually discharges.
The battery will be totally discharged if left
0
unused for 3 months and the date/time and time
code data will be reset. When this happens, set
the [POWER ON/OFF] switch to "ON" to display
the [Initial Setting] screen, then set the date/
time.
(A P28 [Initial Settings] )
26
Power Supply
Power Status Display
Viewfinder Screen and LCD Monitor
The power status is displayed on the display and
menu screens.
Display
B 7.4V
B 100min
C 30%
4 RES
1
F
T
G
P
Q
R
S
Memo :
If the battery in use is not a recommended one,
0
the battery mark which indicates the battery
level may not appear.
The charging function may not work depending
0
on the usage condition.
Display Screen
(A P112 [Display Screen in Camera Mode] )
(A P116 [Display Screen in Media Mode] )
282min
100min
50min
1920x1080
60 i
HQ
4030 20
.
Description
Currently powered by a battery.
When the battery power runs out,
the battery mark appears hollow,
and "RES" (yellow) is displayed.
Memo :
You can set the display using
0
[LCD/VF] B [Display Settings]
B [Battery].
(A P99 [ Battery ] )
Acquisition of battery information
may fail if a recommended battery
is not used.
An error has occurred during
battery charging; the charging
function is not working or charging
has been interrupted.
Memo :
If the error appears, turn off the
0
power and remove the battery
then reinsert the battery and
turn the power on again.
Currently powered by an AC
adapter.
Camera recorder battery charging
in progress.
(A P99 [Details on charging
condition] )
00: 00: 00.00
Jan 1 2,2016
12 :34 :56
5 . 6f t
AE
6
+
0
dB
F1. 6
10
0
P 13000K
1/ 100
Advertisement
Table of Contents
