Crestron Isys TPS-4000 Operation Manual page 15

®
Crestron Isys TPS-4000
AUDIO MENU
Operations Guide - DOC. 6268
transferred. The Net ID for the TPS-4000 is factory set to 03. No two devices in the
same system can have the same Net ID
Two buttons adjacent to the hexadecimal display, UP and DOWN, increase and
decrease the CRESNET ID by one, respectively.
Select the Return button located on the INTERFACE MENU to return to the
SETUP MENU.
Audio Menu
Audio is a useful feedback tool and it can be used to enhance a custom interface. To
access the AUDIO MENU, shown to the left, press the Audio button from the
SETUP MENU. The AUDIO MENU offers a series of buttons, which opens
additional screens and is detailed in a table after this paragraph. Two of the buttons
on the AUDIO MENU perform a function directly. The Restore Default Settings
button returns all audio parameters to their default settings when the button is
selected. After audio parameters have been set, select the Return button to return to
the SETUP MENU.
Audio Setup Details
AUDIO AUDIO
MENU SETUP
1
BUTTON SCREEN
Master Master
88% Volume
WAV 88% WAV
(On)
Line 88% Line
(On)
All Audio All Audio
(On) Control
Key Click Key Click
Enabled
(Vol. 29%)
3
Mic AGC AGC
On
Treble & Treble &
Bass Bass
(49%)
1. The button text shown demonstrates the default audio setting for a given button. The items in
parenthesis are also default values, but are seen in subsequent screens.
10.4 Inch Tilt Touchpanel: Crestron Isys
10.4 Inch Tilt Touchpanel
DESCRIPTION
The volume of all audio types (WAV, line, and key click)
is affected by the Master Volume control. If the Master
Volume control is set to 100%, the volume for any type of
audio is at maximum. If the Master Volume is set to 0%,
the value of all audio types is overridden and the
touchpanel is silent. If Master Volume is a percentage
(say 50%), then all audio types can only achieve half their
value.
Enable WAV files with the WAV On button. WAV Off
disables this feature. Adjust the volume with the UP and
DOWN buttons. Select the Play WAV File to sample and
adjust the volume as a pre-loaded WAV file plays.
Enable line level audio with the Line On button. Line Off
disables this feature. Adjust the volume with the UP and
DOWN buttons.
All types of audio may be disabled with a single button
press. All Audio Off activates global muting. All Audio
On enables all audio.
Click On enables the key click sound, Click Off disables
the key click. Adjust the volume with the UP and DOWN
buttons.
The built-in microphone AGC (Automatic Gain Control)
is enabled by the Mic Audio AGC On button and
disabled with the Mic Audio AGC Off button.
Two UP and DOWN buttons allow independent treble
and bass adjustment.
2
®
TPS-4000 • 11