Firmware Upgrade - Crestron Isys TPS-4000 Operation Manual

10.4 Inch Tilt Touchpanel
A firmware upgrade file has the
extension .csf.
34 • 10.4 Inch Tilt Touchpanel: Crestron Isys
"Open" Window
5. Select the VT Pro-e (.vtz) file and click Open. The transfer will complete
automatically.

Firmware Upgrade

To take advantage of all the TPS-4000 features, it is important that the unit contains
the latest firmware available. Therefore, please check the Crestron website
(http://www.crestron.com/downloads/software_updates.asp) for the latest version of
firmware. Not every product has a firmware upgrade, but as Crestron improves
functions, adds new features, and extends the capabilities of its products, firmware
upgrades are posted. To upgrade the firmware, complete the following steps.
NOTE: The following is the acceptable file extension for a firmware update file:
.csf TPS.V.XXXXX.csf (panel firmware)
1. Make sure that "Communication Settings" that begins on page 28 has been
performed.
2. As shown after this step, select File Transfer | Update Touchpanel
Firmware from the Viewport menu.
File Transfer | Update Touchpanel Firmware Command
3. As shown after this step, select the Net ID of the TPS-4000 touchpanel and
then click OK. The "Open" window appears (refer to the subsequent
graphic).
®
TPS-4000
®
Crestron Isys TPS-4000
Operations Guide - DOC. 6268