Crestron Isys TPS-4000 Operation Manual page 16

10.4 Inch Tilt Touchpanel
Video Screen
12 • 10.4 Inch Tilt Touchpanel: Crestron Isys
2. Each screen has its own Return button to revert to the AUDIO MENU. Selected buttons are shown
in red on the touchpanel.
3. AGC is a means of automatically controlling the gain of the amplifier in order to maintain a constant
level over a limited range. It does not turn off the microphone.
NOTE: If key click is enabled on a touchpanel, each press of the touchpanel results
in an audible click. It may be desirable to conceal the key click sound for certain
buttons (e.g., if the button triggers playing of a WAV file). Using VT Pro-e, the
panel designer has the option to suppress the key click on a button-by-button basis
from the "Button Properties" window. A button must have a page flip or a join
number other than "0" assigned for it to click.
Video Menu
The TPS-4000 can display balanced and unbalanced composite video and S-video
input supporting both NTSC/PAL formats. Select the Video button from the SETUP
MENU to display the video screen, shown to the left. The type of video source
signal is specified by selecting Select Input. The touchpanel can be configured to
auto-detect (S-video or composite) or can be set to a specific connection type (S-
video or composite). Select the appropriate input mode.
The Show Controls button on the video screen offers another screen with a series of
buttons, each is detailed in a table after this paragraph. After video parameters have
been set, select the Return button to return to the SETUP MENU.
Video Setup Details
VIDEO
SCREEN
1
BUTTONS
Brightness UP button increases video image brightness, DOWN button decreases
video image brightness.
Contrast UP button increases video image contrast, DOWN button decreases
video image contrast.
Saturation UP button increases video image saturation, DOWN button decreases
video image saturation.
Hue UP button increases video image hue, DOWN button decreases video
image hue.
Still/Motion The Motion setting eliminates the motion artifacts caused by the
(toggle) difference between first and second halves of a video frame field. The
Still setting yields a much sharper image, however, motion artifacts
may occur if fast moving objects are displayed.
Hide Controls This button returns the display to the video screen.
Default Returns you to the default settings. You are prompted with "Are you
sure?" Answering YES to the prompt returns you to default settings.
Answering NO to the prompt returns you to the previous screen.
Return Reverts to the SETUP MENU
1. Video default is 50% for each of the video parameters (brightness, contrast, saturation, and hue).
2. Each screen has its own Return button to revert to the SETUP MENU.
®
TPS-4000
®
Crestron Isys
2
DESCRIPTION
Operations Guide - DOC. 6268
TPS-4000