Specifications - Crestron Isys TPS-4000 Operation Manual

®
Crestron Isys TPS-4000
Operations Guide - DOC. 6268

Specifications

The following provides a summary of specifications for the TPS-4000 touchpanel.
Specifications for the TPS-4000 Touchpanel
SPECIFICATION
Power Requirements
Default Network ID
Timeout
Signal Join Maximums
Control System Update
1,2,3
Files
2-Series Control System
CEN/CN-TVAV
CNMSX-AV/PRO
CNRACKX/-DP
CNMS, CNRACK,
CNLCOMP
ST-CP
Audio
Video
(continued on next page)
10.4 Inch Tilt Touchpanel: Crestron Isys
10.4 Inch Tilt Touchpanel
DETAILS
22 Watts (0.92 Amp @ 24 VDC)
03
Adjustable from 0 to 120 minutes (Default = 15
min.)
4000 Digital, 4000 Analog, 999 Serial
Version C2.V2004.CUZ or later
Version 51130V.UPZ or later
Version 51125X.UPZ or later
Version 51125W.UPZ or later
Version 3.18.09m, l, c or later or later
Version 4.02.4S.UPZ or later
•
Balanced (20 kΩ) & unbalanced (10 kΩ) line
level stereo input through 6-position mini-
terminal block connector
•
Maximum input level 2 Vrms single ended,
4 Vrms differential with internal volume
control and two speakers
•
Balanced line level microphone with AGC
output via 3-position mini- terminal block
connector
•
Microphone Output Impedance: 600 Ohm
balanced / 300 Ohm Unbalanced
•
Maximum Microphone Output: 1 Vrms single
ended, 2 Vrms differential
•
Built-in WAV file (8bit 8kHz mono PCM type)
5
& key click capability
•
Speaker amplification: 2 Watts per channel
•
Stereo headphone mini-phone jack on rear
of unit
•
Direct Composite/S-video input through
TPS-IMPC/IMW, Balanced 100 Ω,
Unbalanced 75 Ω
•
Built-in time base correction for stable video
•
Video can be displayed full screen or in a
window
•
NTSC and PAL supported
2,4
3,4
3,4
3,4
3
®
TPS-4000 • 3