Crestron Isys TPS-4000 Operation Manual page 10

10.4 Inch Tilt Touchpanel
Physical Views of the TPS-4000 Touchpanel (Top and Bottom)
Physical Views of the TPS-4000 Touchpanel (Side with Min. and Max. Angle)
8.57 in
(21.77 cm)
10.03 in
(25.48 cm)
6 • 10.4 Inch Tilt Touchpanel: Crestron Isys
7.21 in
(18.31 cm)
TILT ANGLE
30 TO 80
DEGREES
Sound
The TPS-4000 has built-in speakers with power amplifiers. Sound can be generated
by the panel using downloaded wave files (.WAV) or can be mixed in from an
external line level audio source. The audio amplifiers output 2 Watts per channel.
Refer to "WAV File Audio Messages" on page 23 for WAV file details. There is a
built-in microphone in the touchpanel, which is amplified to produce a line level
differential output. The microphone amplifier has two modes, AGC or fixed gain.
The AGC is selectable using an internal join number. Refer to "Reserved Join
Numbers" on page 26 for more information.
A "Dynamic range" compression feature is provided for the TPS-4000. When
enabled, the audio amplifier gain is reduced dynamically for loud signal levels, thus
eliminating most distortion at the speakers. For quiet audio signals, the gain is not
reduced. When "Dynamic range" compression is turned off (default), the audio
amplifier gain remains fixed for all signal levels at the given volume setting.
®
TPS-4000
Crestron Isys
0.75 in
(1.91 cm)
5.40 in
(13.72 cm)
(10.41 cm)
9.32 in
(23.67 cm)
Operations Guide - DOC. 6268
®
TPS-4000
3.90 in
(9.91 cm)
4.10 in
6.86 in
(17.41 cm)
1.40 in
1.20 in
(3.55 cm)
(3.04 cm)