BLUM MINIPRESS P Operator's Manual page 27

8.3 - Function errors
Error Cause
Clamps do not Incorrect clamp button position
function (optional)
Clamp valve defective
Operational status Indicator lamp bulb defective
indicator does not
light
Drive circuit fuse defective
Air filter is not tight Bracket hardware is loose or defective
Other problems
Chip blow-off is Hose is kinked or not tight
defective
Chip blow-off is out of position
Gearbox defective Spindles or gears are damaged
8 - Troubleshooting
Solution
Change clamp button position
Replace clamp valve
Replace neon bulb
Have an licensed electrician replace the
drive circuit fuse
Attach bracket hardware or replace
Replace air filter
Replace hose
Correct chip blow-off by turning the blow-off
hose
Replace gearbox
27
Comment
See point 3.1.3
none
See point 7.1.3
none
none
none
none
none
none
BA-106/1EA M53.10XX