15) Setting Clamps (Optional) (4.17) To The Material Thickness; 16) Attaching Insertion Ram To Swing Arm (4.8); 17) Clipping Concealed Hinge On To The Insertion Ram; 18) Boring - BLUM MINIPRESS P Operator's Manual

4.18
4.17
4.19
2.7
4 - Concealed hinge installation
4.1.15) Setting clamps (optional)
• Loosen clamping knob
• Set the clamps
(4.19) is a max. x = 1/8" / 3 mm.
• Tighten clamping knob by hand
4.1.16) Attaching insertion ram to swing arm
• Place insertion ram on to the two mounting screws
• Tighten the screws so that the insertion ram is secure.

4.1.17) Clipping concealed hinge on to the insertion ram

4.1.18) Boring

3.1
3.2
ATTENTION:
3.3
All items except for the work piece should be removed from the work
area of the machine. Keep your hands out of work area (A).
4.8
• Drill power switch
• Clamp button (optional)
• Swing arm (4.8)
• Hold down door outside of danger area (A) and press against the ruler stop
• Press drill/press stroke button
• Release drill/press stroke button (3.2).
(4.17) to the material thickness
(4.18) .
(4.17) so that the distance between the door and the clamp guard
(4.18)
(3.1) to ON
(3.3) to pos. "Auto"
must be swivelled up.
(3.2) until boring depth is reached.
17
(4.8)
(4.20) on the swing arm
BA-106/1EA M53.10XX
(4.8) .
(2.7) .