Other Installation; Boring Hole Groups; 1) Required Parts; 2) Setting Drill Bit Length - BLUM MINIPRESS P Operator's Manual

2.2
2.7
2.7

6 - Other installation

6.1 - Boring hole groups

6.1.1) Required parts

• Drill bits:
1x ø 5 mm clockwise
2x ø 5 mm counterclockwise
• Cover caps (4.3)
• Cabinet side

6.1.2) Setting drill bit length

(See point 4.1.2)

6.1.3) Setting boring pattern

• Pull out boring head securing knob
• Simultaneously move the lever
knob (4.5)

6.1.4) Inserting drill bits into the chuck

(See point 4.1.4)

6.1.5) Checking boring depth setting

(see points 4.1.5 / 4.1.6 / 4.1.7)

6.1.6) Setting stroke speed

(see points 4.1.8 / 4.1.9 / 4.1.10)

6.1.7) Setting boring distance

• Set the desired dimension using the hand wheel
• Example: SYS - 37 mm
6.1.8) Setting ruler stops
Set the ruler stops
IMPORTANT:
!
Indicator edge is on the inside of the sliding part.

6.1.9) Placing cabinet side on the work table and pushing up against the stop

3.1
(See point 4.1.14)
3.2
ATTENTION:
3.3
All items except for the work piece should be removed from the work
area of the machine. Keep your hands out of work area (A).
6.1.10) Setting clamps (optional)
4.8
(See point 4.1.15)

6.1.11) Boring

(See point 4.1.18)

6.1.12) Releasing clamps (optional)

• Press clamp button
• Push cabinet side to the next stop.
(6.1) (marked in black)
(6.2) (marked in orange)
(4.5)
(4.6) to symbol
(2.7)
(2.7) to the desired dimension and clamp.
(4.17) to the material thickness
(3.3)
21
(5.3) • Release boring head securing
BA-106/1EA M53.10XX