Table of Contents
Advertisement
Pronar T683
5.12 INSTALLATION AND DISASSEMBLY OF WALL
EXTENSIONS
DANGER
Assembly and disassembly of wall extensions should be carried out with the use of
appropriate platforms, ladders or when standing on a ramp. These tools must be in good
condition to fully protect the persons working on them against falling. Work should be
performed by at least two persons. Exercise particular caution.
Installation of wall extensions
Secure middle wall extension stakes to wall middle stakes.
Secure rear wall extension stakes to rear wall stakes.
Install front wall extension.
Install rear wall extension.
Install side wall extensions.
screw down the wall extension ladder to the front wall.
Disassembly of wall extensions should be performed in reverse order.
5.13 DRAWBAR EYE ADJUSTMENT
Adjust drawbar eye (1) by changing the position of the eye in relation to the drawbar
faceplate (2).
Scope of activities
Immobilise trailer with parking brake.
Place wheel chocks under trailer wheels.
Unscrew drawbar eye (1) from faceplate (2).
First place upper pins of extension in appropriate locks of rear stakes
and front wall, and after that, secure base of extension with the aid of
hinge pins to upper part of side wall.
5.40
SECTION 5
Advertisement
Table of Contents
