Tensioner Operation; Transporting Loads - PRONAR T023 Manual

Pronar T023, Pronar T023M
experience. The trailer user must carefully read the regulations concerning road transport
and comply with them.

4.3.3 TENSIONER OPERATION

FIGURE 4.2 Right tensioner
(1) tensioner lever, (2) fixing hook, (3) pawl, (4)
release lever
(1) until lever (4) can be released. Release lever (4) and remove belts.

4.4 TRANSPORTING LOADS

When driving on public roads, respect the road traffic regulations, exercise caution and
prudence. Listed below are the key guidelines for driving the tractor and trailer combination.
• Before moving off make sure that there are no bystanders, especially children,
near the trailer or the tractor. Take care that the driver has sufficient visibility.
• Make sure that the trailer is correctly attached to the tractor and tractor's hitch is
properly secured.
• The trailer must not be overloaded, loads must be uniformly distributed so that the
maximum permissible axle loads are not exceeded. The trailer's maximum
carrying capacity must not be exceeded as this can damage the trailer and pose a
risk to the operator or other road users.
Required actions
Load can be attached using two tensioners
bolted to the frame front beam (the tensioner
is available only in T023M trailer as optional
equipment).
Attach fixing belts or ropes to a fixed element
of the trailer structure on one side, e.g. to
fixing grips on the rear ladder and to a fixing
hook in the tensioner on the other side.
Rotate the lever in the direction indicated by
arrow in order to tighten the belt.
In order to dismount belts or ropes, turn lever
4.10
SECTION 4