Trailer Cleaning - PRONAR T023 Manual

SECTION 5
oil with skin wash the place of contact with water and soap. Do NOT apply organic solvents
(petrol, kerosene). Contaminated clothing should be changed to prevent access of oil to skin.
In the event of contact of oil with eye, rinse with large quantity of water and in the event of the
occurrence of irritation consult a doctor. Hydraulic oil in normal conditions is not harmful to
the respiratory tract. A hazard only occurs when oil is strongly atomised (oil vapour), or in the
case of fire during which toxic compounds may be released.
DANGER
Oil fires should be quenched with the use of carbon dioxide, foam or
extinguisher steam. Do not use water to quench oil fires.
Lubricants
For heavily loaded parts it is recommended to apply lithium greases with addition of
molybdenum disulphide (MOS2) or graphite. In the case of less loaded sub-assemblies the
application of general purpose machine greases is recommended, which contain
anticorrosion additives and have significant resistance to being washed away by water.
Similar characteristics should typify aerosol preparations (Silicon greases and anticorrosive
lubricant substances).
Before starting to use greases acquaint oneself with the content off the information leaflet for
the chosen product. Particularly relevant are safety rules and handling procedures for given
lubricant product and waste utilisation (used containers, contaminated rags etc.). Information
leaflet (material safety data sheet) should be kept together with grease.

5.7 TRAILER CLEANING

• The trailer should be cleaned as needed. Before using pressure washer the user
is obliged to acquaint himself with the operating principles and recommendations
concerning safe use of this equipment.
• The trailer only be cleaned with clean running water. Cleaning detergents with
neutral pH may be used, which do not react aggressively with the trailer's
structural elements.
PRONAR T023, PRONAR T023M
5.29