Troubleshooting - PRONAR T023 Manual

PRONAR T023, PRONAR T023M
Tighten the nut and check position of drawbar with regard to tractor hitch.
FIGURE 5.14 Adjustment of drawbar position
(1) adjusting clamp, (2) spring, (3) drawbar

5.11 TROUBLESHOOTING

5.11.1 TROUBLESHOOTING
FAULT
Problem with moving off
CAUSE
Brake system conduits not
connected
Applied parking brake
Damaged pneumatic
system connection conduits
Leaking connections
Control valve or braking
force regulator damaged
5.34
REMEDY
Connect brake conduits (applies
to pneumatic systems)
Release parking brake.
Replace.
Tighten, replace washers or seal
sets, replace conduits.
Check valve, repair or replace.
SECTION 5