Withdrawal From Use - PRONAR T023 Manual

PRONAR T023, PRONAR T023M
IMPORTANT!
Waste oil should only be taken to the appropriate facility dealing with the re-use
of this type of waste. Do NOT throw or pour oil into sewerage or water tanks.

1.7 WITHDRAWAL FROM USE

In the event of decision by the user to withdraw the machine from use, comply with the
regulations in force in the given country concerning withdrawal from use and recycling of
machines withdrawn from use. Before proceeding to dismantle equipment, oil shall be
completely removed from hydraulic system.
Worn out or damaged parts that cannot be reclaimed should be taken to a collection point for
recyclable raw materials. Hydraulic oil should be taken to the appropriate facility dealing with
the re-use of this type of waste.
DANGER
During dismantling, use the appropriate tools, equipment (overhead travelling
crane, crane or hoist etc.) and use personal protection equipment, i.e.
protective clothing, footwear, gloves and eye protection etc.
Avoid contact of skin with oil. Do not allow used hydraulic oil to spill.
1.14
SECTION 1