Checking Slackness Of Wheel Axle Bearings - PRONAR T023 Manual

SECTION 5
• changing grease in axle bearings,
• changing bearings, hub seals,
• replacement of brake shoes,
• other axle repairs,
may be performed by specialized vehicle service stations.

5.2.2 CHECKING SLACKNESS OF WHEEL AXLE BEARINGS

FIGURE 5.1 Lifting jack support point
(1) wheel axle, (2) U bolt
Preparation procedures
Hitch trailer to tractor, immobilize tractor with parking brake.
Park the trailer on hard level ground.
Place chocks under the trailer's wheel that will not be raised. Ensure that
machine will not move during inspection.
Raise the wheel (opposite to the side where chocks are placed).
Tractor must be placed to drive forward.
PRONAR T023, PRONAR T023M
5.3