Preparing The Trailer For Normal Use - PRONAR T023 Manual

Pronar T023, Pronar T023M
• Switch on individual lights, check correct operation of electrical system.
• Release tractor's parking brake. Perform test drive. Check the trailer's braking
efficiency during driving.
• Stop tractor and turn off the engine, immobilise the tractor and trailer with parking
brake.
If during test run worrying symptoms occur such as:
• excessive noise and abnormal sounds originating from the rubbing of moving
elements,
• leaky brake system, hydraulic oil leaks,
• incorrect operation of brake cylinders,
• other faults,
stop operating the trailer and do not operate it until the malfunction is corrected. If a fault
cannot be rectified or the repair could void the warranty, please contact retailer for additional
clarifications or to perform the repair.

4.1.4 PREPARING THE TRAILER FOR NORMAL USE

Scope of inspection activities
• Visually inspect if the tyres are properly inflated. In case of doubt, carefully check
tyre pressure.
• Check technical condition of drawbar eye.
• Check correctness of electrical system operation.
• Check technical condition and completeness of safety guards.
• Install the slow-moving vehicle warning sign - if the trailer is used on public roads.
• Fold the extendible frame before driving on public roads.
4.4
SECTION 4