Transport; Transport On Vehicle - PRONAR T023 Manual

PRONAR T023, PRONAR T023M
• making unauthorised alterations to machine design,
the user will lose the right to warranty service.
The user is obliged to report immediately on noticing any wear in the paint coating or traces
of corrosion, and to have the faults rectified whether they are covered by the warranty or not.
For detailed Terms & Conditions of Warranty, please refer to the WARRANTY BOOK
attached to each machine.
Modification of the machine without the written consent of the Manufacturer is forbidden. In
particular, do NOT weld, drill holes in, cut or heat the main structural elements of the
machine, which have a direct impact on the machine operation safety.

1.5 TRANSPORT

The machine is prepared for sale completely assembled and does not require packing.
Packing is only required for the machine's technical documentation and any extra fittings. The
agricultural trailer is delivered to the user either transported on a vehicle or, after being
attached to a tractor, independently (towing with a tractor).

1.5.1 TRANSPORT ON VEHICLE

Loading and unloading of the agricultural trailer from vehicle shall be conducted using loading
ramp with the aid of agricultural tractor, overhead crane or hoisting crane. During work
adhere to the general principles of Health and Safety at Work applicable to reloading work.
Persons operating reloading equipment must have the qualifications required to operate
these machines.
IMPORTANT!
Do not attach or hitch the trailer by drawbar eye, under-run protection devices,
mudguard brackets or other structural elements that are not sufficiently strong
to withstand operations of this type.
Lifting equipment used for transporting the machine must be attached only to the fixed
structural elements of the machine. These elements are, first of all: frame, transport catches
and axle.
The trailer should be attached firmly to the platform of the vehicle using straps or chains fitted
with a tightening mechanism. In order to attach the machine in a proper manner, use
1.10
SECTION 1