General Remarks; Do's And Don'ts - Plockmatic 510 Operating Instruction

Friction collator/feeder
Table of Contents

Advertisement

7. General Remarks

Do's And Don'ts

Always connect the equipment to a properly grounded power source receptacle. When in
doubt, have the receptacle checked by a qualified electrician
Warning
Improper connection of the equipment grounding conductor can result in electrical
shock.
Always follow all warnings marked on, or supplied with, the equipment.
Always locate the equipment on a solid support surface with adequate strength for the
weight of the machine.
Always exercise care in moving or relocating the equipment
Always keep magnets and all devices with strong magnetic field away from the
machine.
Do not use a ground adapter plug to connect the equipment to a power source
receptacle that lacks a ground connection terminal.
Do not attempt any maintenance function that is not specifically described in this docu-
mentation.
Do not remove the covers or guards that are fastened with screws.
Do not install the unit near a radiator or any other heat source.
Do not override or "cheat" electrical or mechanical interlock devices.
Do not operate the equipment if you notice unusual noises or odours. Disconnect the
power cord from the power source receptacle and call your customer service engineer
to correct the problem.
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents