Feeding; Using The Cf/Acf 510 As A Feeder - Plockmatic 510 Operating Instruction

Feeding

Only the CF 510 and ACF 510 can be used as feeders. Number of sheets per set is maxi-
mized to 60 per sequence, but is limited by the finishing device.

Using the CF/ACF 510 as a Feeder

In the Main Menu, select Program and press [ ].
Use the [ ] or [
Feeder - Basic or Feeder - Advanced and press
[OK]. Detailed descriptions of the feeder modes
are found later in this section.
Setup the chosen feeder function. Detailed
description of how to program each feeder function
is found later in this section.
Before running chosen program you have to set
the finishing. In the Main Menu, select Finishing
and press [ ]. Select type of finishing using the
[ ] and [ ] buttons and press [OK]. Descriptions
of the finishing types are found later in this section.
Select Proof from Run Menu to calibrate.
Note
This is something you have to do to be able to run the
program you have chosen.
] buttons to select
23