Dual Mode; Increasing Capacity Of The Cf/Acf 510 (Feeding And Collating) - Plockmatic 510 Operating Instruction

Dual Mode

The Dual Mode is a unique function which allows you to use bin 1 or both bin 1 and bin 2
as a Feeder while the remaining bins works as a traditional Collator. This gives the Colla-
tor-Feeder a capacity of 10 + 9 sheets per set.
Only the CF 510 and ACF 510 can be used in Dual Mode.

Increasing capacity of the CF/ACF 510 (Feeding and Collating)

In the Main Menu, select Program and press [ ].
Use the [ ] or [
Dual Mode and press [OK]. Detailed description of
Dual Mode is found later in this section.
Before running chosen program you have to set
the finishing. In the Main Menu, select Finishing
and press [ ]. Select type of finishing using the
[ ] and [ ] buttons and press [OK]. Descriptions
of the finishing types are found later in this section.
Select Proof from Run Menu to calibrate.
Note
This is something you have to do to be able to run the
program you have chosen.
This screen will be shown during calibration. After
calibration, remove the calibration set and check
that it is OK.
] buttons to select
27