Storing A Job - Plockmatic 510 Operating Instruction

Storing a job

You can store current settings on a new job or store changes on an earlier saved job. Jobs
that are changed but not saved are marked with [*].
To store the settings, select Jobs on the Main menu or Run menu and press the [ ] button.
34
When a job is retrieved, the Run menu will be
shown and the program is running.
Note
The finishing type is also remebered in stored jobs. If
you want to change it you have to stop the program
and go to the finishing selections.
If you have new settings that you want to save as
a new job, choose Save or Save as. You will then
be asked to name your job.
If you have changed a saved job you have two
choices:
• Choosing Save will overwrite the current Job. The
current job name is displayed on top of the screen.
• Choosing Save as... gives you the option to save it
as a new job or overwrite another job.
If you are saving a new job or if you are saving an
old job as a new job you will have to name your
job. Use the [ ] and [ ] buttons to go from 0-9-A-
Ö. When you have chosen the first character use
the [ ] and
[ ] buttons to choose the next character. When
you are satisfied with your jobname press [OK] to
save.
Note
The name can be maximum 6 characters long.