2. Running the System
Collating
All four versions of the
Using the C/CF/AC/ACF 510 as a Collator
510 can be used as a collator.
Collator / Feeder
In the Main Menu, select Program using the [ ]
and [
Select Collator and press [OK].
Select any of the programs using the [ ] and
[
] buttons and press [ ] to enter program setup.
Detailed programming descriptions are found later
in this section.
Before running chosen program you have to set
the finishing. In the Main Menu, select Finishing
and press [ ]. Select type of finishing using the
[
] and [
of the finishing types are found later in this section.
] buttons and press [ ].
] buttons and press [OK]. Descriptions
19