Plockmatic 510 Operating Instruction page 20

Using the C/CF/AC/ACF 510 as a Collator
20
Select [Proof] in Run Menu to calibrate.
Note
This is something you have to do to be able to run the
program you have chosen.
This screen will be shown during calibration.
If an error screen should appear, attend to the
problem, When the error is located and corrected
press [ESC]. Press Proof in Run Menu to calibrate
again.
After calibration, remove the calibration set and
check that it is OK.
After a successfully completed calibration, the Run
Menu will be shown. If you are satisfied with your
programmed settings, press [Start] to start the job.
This screen will be shown while the job is running.
The number (in this exampel 1) will tell you how
many sheets that has been completed.