Table of Contents
Advertisement
dc_BA.boo Seite 299 Mittwoch, 20. Mai 2009 10:17 10
Brakes
Problem
Possible cause/consequence
The brake pedal resistance is
Risk of accident
lower and the pedal travel is
greater than usual.
Risk of accident
The SBC
The brake pedal is pulsating.
The SBC
the brake pedal is depressed.
The brakes produce noise.
The brake system is designed to decelerate your
SLR from high speeds at the best possible rate.
Depending on the applied brake force, speed, and
ambient conditions, the brake system may pro-
duce noise when you apply the brakes at a moder-
ate rate.
G
The SBC
TM
brake system is activated using the
brake pedal.
You have just started the engine.
G
TM
brake system is in emergency mode.
TM
brake system pump is running while
Practical advice
Troubleshooting
Suggested solutions
When the brake pedal is depressed again,
brake pedal resistance and travel return to
normal.
Observe the additional messages in the mul-
ti-function display ( page 237).
Apply the brakes when driving at a high
speed.
G
Risk of accident
Make sure that you do not endanger other road
users when applying the brakes.
299
Advertisement
Table of Contents
