Table of Contents
Advertisement
dc_BA.boo Seite 185 Mittwoch, 20. Mai 2009 10:17 10
Thus, when the centre spar is installed and
the passenger seat is recognised as occu-
pied, the message
Please remove centre
spar
appears in the multi-function display
after switching on the ignition.
Remove the centre spar.
!
The centre spar end seals must be free from
dirt and debris before installing the centre spar.
Otherwise paintwork damage may occur.
Installing/removing the centre spar
The centre spar is located in the boot
( page 189).
1 Tensioning lever
2 Centre spar
3 Front pin
4 Front recess
Controls in detail
Features
Open tensioning lever 1.
Hold centre spar 2 above the centre
of the cabin.
Insert front pin 3 in the direction of ar-
row into the front recess 4 on the
dashboard.
5 Rear pin
6 Rear recess
185
Advertisement
Table of Contents
