Table of Contents
Advertisement
dc_BA.boo Seite 129 Mittwoch, 20. Mai 2009 10:17 10
Restoring the factory settings
You can reset the functions of almost all
the submenus to the factory settings.
For safety reasons, it is not possible to re-
set all of the functions. Permanent
Speedtronic can only be set in the
submenu ( page 139). The
Light cir-
function in the
cuit Headlamp mode
submenu is only reset if the vehicle is
ing
stationary.
Press the è or ÿ button repeat-
edly until the
menu appears
Settings
in the left-hand multi-function display.
Vehicle
Press the reset button on the instru-
ment cluster ( page 43) for approxi-
Light-
mately three seconds.
In the right-hand multi-function display
a confirmation prompt appears, re-
questing you to press the reset button
once again.
Controls in detail
On-board computer
Press the reset button again.
The functions of most of the submenus
are reset to the factory settings.
i
If you do not press the reset button a second
time to confirm, the changed settings remain
set. You will see the Settings menu again after
approximately five seconds.
129
Advertisement
Table of Contents
