Table of Contents
Advertisement
dc_BA.boo Seite 244 Mittwoch, 20. Mai 2009 10:17 10
Practical advice
Display messages
Left display
Right display
Front-Brake
Cooling Fault
Consult workshop
P
Selector lever
to P
244
Possible cause/conse-
Possible solution
quence
G
Risk of accident
The front brake is not cooled
sufficiently.
When the message still appears in the multi-function dis-
play,
You have either switched off
the ignition or opened the driv-
er's door or the bonnet with
SBC Hold/SBC Stop activated.
The horn will also sound inter-
mittently.
You wish to start the engine but
the selector lever is not in
position P.
Stop your vehicle safely immediately.
Turn the key back to position 0 in the ignition lock.
Repeat the starting procedure ( page 58).
Do not drive any further.
Consult your PLM or a qualified specialist workshop,
e.g. an SLR Service Centre immediately.
Move the selector lever to P.
Move the selector lever to P.
Advertisement
Table of Contents
