Replacing the sensor box at the motor
The individual parts and components of the sensor box (CE version) are shown in the following
diagram:
①
Miniature circuit breaker
②
Mounting plate
③
4 Allen screws to attach the box to the motor
④
Ground connection of the power supply in the box
⑤
Cable glands
⑥
4x M8 nuts to fasten the mounting plate in the box
⑦
LAN connection
⑧
Terminal block
⑨
Power supply connecting terminals
Figure 9-2
Exploded diagram of the sensor box (CE version)
The individual parts and components of the sensor box (UL version) are shown in the following
diagram:
Operating Instructions, 06/2020
9.7 Replacing connectivity module components
Maintenance
47