Connection; Only Ul Version: Opening And Closing The Sensor Box Door - Siemens SIMOTICS CONNECT 600 Operating Instructions Manual

Connection

6.1

Only UL version: Opening and closing the sensor box door

For the CE version (CE - Conformité Européenne) of the connectivity module, the sensor box
door has a standard lock.
For the UL version (UL - Underwriters Laboratories) of the connectivity module, in addition to the
standard lock, the sensor box is also equipped with a rotary disconnection device.
Note
Carefully observe the five safety rules (Page 8) when performing any work.
The rotary disconnection device provided in the UL version of the connectivity module is shown
in the following diagram:
①
②
Opening the door
1. Turn the rotary disconnection device
The sensor box power supply is switched off.
2. Open the sensor box door.
3. To switch on the power supply of the sensor box for commissioning and maintenance work,
turn the rotary disconnection device
Operating Instructions, 06/2020
Rotary disconnection device in the door
Rotary disconnection device in the sensor box
①
into the "Off" position.
②
into the "On" position.
6
25