Table of Contents
Advertisement
Maintenance
9.7 Replacing connectivity module components
Note
Tightening torques
When mounting the sensor box and the components, carefully comply with the tightening
torques as specified in "Tightening torques".
Note
Terminal diagram
The terminal diagram for the sensor box is attached to the inside of the housing door and in
the Appendix (Page 71).
Replacement parts
You can order the individual connectivity module components as replacement part (Page 61).
Replacing the IPC
1. Note the connection assignment of the IPC.
2. Comply with the instructions for removal and mounting in the Operating Instructions of the
IPC (Page 16).
3. Connect the cable according to the documented connection assignment.
44
Operating Instructions, 06/2020
Advertisement
Table of Contents
