Table of Contents
Advertisement
If the electronic key does not operate
properly
If communication between the electronic key and vehicle is inter-
rupted (P. 130) or the electronic key cannot be used because the
battery is depleted, the smart entry & start system and wireless
remote control cannot be used. In such cases, the doors can be
opened and the hybrid system can be started by following the pro-
cedure below.
Locking and unlocking the doors
Use the mechanical key (P. 115)
in order to perform the following
operations:
Locks all the doors
1
Unlocks all the doors
2
Starting the hybrid system
Ensure that the shift position is in P and depress the brake pedal.
1
Touch the Toyota emblem side
2
of the electronic key to the
power switch.
When
the
electronic
detected, a buzzer sounds and the
power switch will turn to ON mode.
When the smart entry & start sys-
tem is deactivated in customization
setting, the power switch will turn
to ACCESSORY mode.
Firmly depress the brake pedal and check that
3
the multi-information display.
Press the power switch.
4
In the event that the hybrid system still cannot be operated, contact
your Toyota dealer.
7-2. Steps to take in an emergency
key
is
413
is shown on
7
Advertisement
Table of Contents
