Table of Contents
Advertisement
Connect the bottle to the com-
10
pressor.
As shown in the illustration, insert
the bottle vertically into the com-
pressor to connect making sure
that the claw on the bottle's neck is
hooked onto the cutout of the com-
pressor case.
Check the specified tire inflation
11
pressure.
Tire inflation pressure is specified
on the label on the driver's side pil-
lar as shown. (P. 434)
Start the hybrid system. (P. 173)
12
To inject the sealant and inflate
13
the tire, turn the compressor
switch on.
7-2. Steps to take in an emergency
401
7
Advertisement
Table of Contents
