Table of Contents
Advertisement
NOTICE
When using a high pressure car wash
■
Do not bring the nozzle tip close to boots (rubber or resin manufactured
cover), connectors or the following parts. The parts may be damaged if they
come into contact with high-pressure water.
• Traction related parts
• Steering parts
• Suspension parts
• Brake parts
Keep the cleaning nozzle at least 30 cm (11.9 in.) away from the vehicle
●
body. Otherwise resin section, such as moldings and bumpers, may be
deformed and damaged. Also, do not continuously hold the nozzle in the
same place.
Do not spray the lower part of the windshield continuously.
●
If water enters the air conditioning system intake located near the lower
part of the windshield, the air conditioning system may not operate cor-
rectly.
Do not wash the underside of the vehicle using a high pressure car
●
washer.
To prevent damage to the panoramic roof (if equipped)
■
Observe the following precautions. Otherwise, the surface of the panoramic
roof may be damaged, or the deterioration of the coating may be acceler-
ated.
Before washing the vehicle, remove any dust, sand or other foreign matter
●
using water.
Do not use harsh brushes, scrubbing brushes or sharp objects to wash the
●
roof. Use only soft cloths or sponges.
Use a mild soap when removing dirt, and avoid the use of oil-based prod-
●
ucts (such as glass coating or car wax), alcohol-based products (such as
glass cleaner), or abrasive cleansers.
After cleaning, wash away any remaining soap with water.
If there is iron oxide on the vehicle, wash it away with water while wiping
●
gently without scrubbing.
Do not attach suction cups or sticky objects, such as stickers.
●
Promptly remove the information label attached to the panoramic roof after
confirming the content.
If snow has accumulated on the roof, remove it while being careful to avoid
●
scratching the roof.
If there is frost or ice on the roof, avoid the use of scrapers or de-icer.
6-1. Maintenance and care
289
6
Advertisement
Table of Contents
