Table of Contents
Advertisement
Note for a smart entry & start system
■
If the door handle becomes wet while the electronic key is within the effective
range, the door may lock and unlock repeatedly. In that case, follow the fol-
lowing correction procedures to wash the vehicle:
Place the key in a position 2 m (6 ft.) or more separate from the vehicle
●
while the vehicle is being washed. (Take care to ensure that the key is not
stolen.)
Set the electronic key to battery-saving mode to disable the smart entry &
●
start system. (P. 130)
Wheels and wheel ornaments
■
Remove any dirt immediately by using a neutral detergent.
●
Wash detergent off with water immediately after use.
●
To protect the paint from damage, make sure to observe the following pre-
●
cautions.
• Do not use acidic, alkaline or abrasive detergent
• Do not use hard brushes
• Do not use detergent on the wheels when they are hot, such as after driv-
ing or parking in hot weather
Bumpers
■
Do not scrub with abrasive cleaners.
Front side windows water-repellent coating (if equipped)
■
The following precautions can extend the effectiveness of the water-repellent
coating.
Remove any dirt, etc. from the front side windows regularly.
●
Do not allow dirt and dust to accumulate on the windows for a long period.
●
Clean the windows with a soft, damp cloth as soon as possible.
Do not use wax or glass cleaners that contain abrasives when cleaning the
●
windows.
Do not use any metallic objects to remove condensation build up.
●
Plated portions
■
If dirt cannot be removed, clean the parts as follows:
Use a soft cloth dampened with an approximately 5% solution of neutral
●
detergent and water to clean the dirt off.
Wipe the surface with a dry, soft cloth to remove any remaining moisture.
●
To remove oily deposits, use alcohol wet wipes or a similar product.
●
6-1. Maintenance and care
287
6
Advertisement
Table of Contents
