Table of Contents
Advertisement
Start the engine of the second vehicle. Increase the engine speed
4
slightly and maintain at that level for approximately 5 minutes to
recharge the 12-volt battery of your vehicle.
Maintain the engine speed of the second vehicle and start the
5
hybrid system of your vehicle by turning the power switch to ON
mode.
Make sure the "READY" indicator comes on. If the indicator light
6
does not come on, contact your Toyota dealer.
Once the hybrid system has started, remove the jumper cables in
7
the exact reverse order from which they were connected.
Close the exclusive jump starting terminal cover, and reinstall the
8
fuse box cover to its original position.
When installing, first hook the fuse box cover onto the two rear tabs.
Once the hybrid system starts, have the vehicle inspected at your
Toyota dealer as soon as possible.
Starting the hybrid system when the 12-volt battery is discharged
■
The hybrid system cannot be started by push-starting.
To prevent 12-volt battery discharge
■
Turn off the headlights and the audio system while the hybrid system is off.
●
Turn off any unnecessary electrical components when the vehicle is running
●
at a low speed for an extended period, such as in heavy traffic.
7-2. Steps to take in an emergency
417
7
Advertisement
Table of Contents
