Table of Contents
Advertisement
Changing settings of the pre-crash safety system
Enabling/disabling the pre-crash safety system
■
The pre-crash safety system can be enabled/disabled on
(P. 94) of the multi-information display.
The system is automatically enabled each time the power switch is
turned to ON mode.
If the system is disabled, the
PCS warning light will turn on
and a message will be dis-
played on the multi-information
display.
Changing the pre-crash warning timing
■
The pre-crash warning timing can be changed on
of the multi-information display.
The operation timing setting is retained when the power switch is turned
off.
Far
1
The warning will begin to oper-
ate earlier than with the default
timing.
Middle
2
This is the default setting.
Near
3
The warning will begin to oper-
ate later than with the default
timing.
4-5. Using the driving support systems
215
4
(P. 94)
Advertisement
Table of Contents
