If The Electronic Key Does Not Operate Properly - Toyota Grand Highlander 2024 Manual

506
7-2. Steps to take in an emergency
If the electronic key
does not operate prop-
erly
If communication between
the electronic key and vehi-
cle is interrupted (P.137)
or the electronic key cannot
be used because the battery
is depleted, the smart key
system and wireless remote
control cannot be used. In
such cases, the doors can
be opened and the engine
can be started by following
the procedure below.
When the electronic key does
■
not work properly
Make sure that the smart key sys-
●
tem has not been deactivated in
the customization setting. If it is
off, turn the function on. (Custom-
izable features: P.538)
Check if battery-saving mode is
●
set. If it is set, cancel the function.
(P.137)
The electronic key function may
●
be suspended. (P.110)
NOTICE
In case of a smart key system
■
malfunction or other
key-related problems
Take your vehicle with all the elec-
tronic keys provided with your
vehicle to your Toyota dealer.
Locking and unlocking
the doors
Use the mechanical key
(P.112) in order to perform the
following operations:
1
Locks all the doors
2
Unlocks all the doors
Turning the key unlocks the driver's
door. Turning the key again unlocks
the other doors.
Key linked functions
■
1
Closes the windows and the
panoramic moon roof
hold)
2
Opens the windows and the
panoramic moon roof
hold)
These settings must be customized
at your Toyota dealer.
*
: If equipped
*
(turn and
*
(turn and