Table of Contents
Advertisement
System check display
■
After turning the power switch to ON mode, opening image is displayed while
system operation is checked. When the system check is complete, the nor-
mal screen will return.
Pop-up display
■
When a system that supports pop-up displays, such as the air conditioning
system, is operated, a pop-up display will be temporarily displayed.
When disconnecting and reconnecting 12-volt battery terminals
■
The fuel consumption display and average vehicle speed will be reset.
Liquid crystal display
■
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
Hybrid System Indicator
■
Charge area
1
Shows that energy is being recovered
via the regenerative brake.
Eco area
2
Shows that the vehicle is being driven in
an Eco-friendly manner.
Hybrid Eco area
3
Shows that gasoline engine power is
not being used very often.
The gasoline engine will automatically stop and restart under various condi-
tions.
Power area
4
Shows that an Eco-friendly driving range is being exceeded (during full
power driving etc.)
By keeping the indicator within Eco area, more Eco-friendly driving can be
●
achieved.
Charge area indicates regeneration
●
used to charge the hybrid battery (traction battery).
*
: When used in this manual, "regeneration" refers to the conversion of
energy created by the movement of the vehicle into electrical energy.
2. Instrument cluster
*
status. Regenerated energy will be
101
2
Advertisement
Table of Contents
