Table of Contents
Advertisement
Reverse warning buzzer
■
When shifting into R, a buzzer will sound to inform the driver that the shift
position is in R.
Restraining sudden start (Drive-Start Control)
■
P. 162
About engine braking
■
When shift position B is selected, releasing the accelerator pedal will apply
engine braking.
When the vehicle is driven at high speeds, compared to ordinary gasoline-
●
fueled vehicles, the engine braking deceleration is felt less than that of other
vehicles.
The vehicle can be accelerated even when shift position B is selected.
●
If the vehicle is driven continuously in the B position, fuel efficiency will
become low. Usually, select the D position.
Automatically P position selection function
■
When the shift position is in a position other than P, pressing the power switch
with the vehicle stopped completely will cause the shift position to change to
P automatically, and then the power switch will turn off
*
: If the power switch is pressed when driving at very low speeds (for exam-
ple, just before the vehicle stops), the shift position may automatically
switch to P. Press the power switch after completely stopping the vehicle to
prevent unexpected sudden stopping of the vehicle.
If the shift position cannot be shifted from P
■
There is a possibility that the 12-volt battery is discharged. Check the 12-volt
battery in this situation. (P. 415)
After recharging/reconnecting the 12-volt battery
■
P. 312
Customization
■
Settings (e.g. Reverse warning buzzer) can be changed.
(Customizable features: P. 437)
4-2. Driving procedures
*
.
183
4
Advertisement
Table of Contents
