Table of Contents
Advertisement
414
7-2. Steps to take in an emergency
Stopping the hybrid system
■
Set the parking brake, shift the shift position to P and press the power switch
as you normally do when stopping the hybrid system.
Replacing the key battery
■
As the above procedure is a temporary measure, it is recommended that the
electronic key battery be replaced immediately when the battery is depleted.
(P. 326)
Changing power switch modes
■
Release the brake pedal and press the power switch in step
The hybrid system does not start and modes will be changed each time the
switch is pressed. (P. 175)
When the electronic key does not work properly
■
Make sure that the smart entry & start system has not been deactivated in
●
the customization setting. If it is off, turn the function on.
(Customizable features: P. 437)
Check if battery-saving mode is set. If it is set, cancel the function.
●
(P. 130)
above.
3
Advertisement
Table of Contents
