Table of Contents
Advertisement
WARNING
●
Do not dirty or damage the front camera.
When cleaning the inside of the windshield, do not allow glass cleaner to
contact the lens of the front camera. Also, do not touch the lens.
If the lens is dirty or damaged, contact your Toyota dealer.
●
Do not subject the front camera to a strong impact.
●
Do not change the installation position or direction of the front camera or
remove it.
●
Do not disassemble the front camera.
●
Do not modify any components of the vehicle around the front camera
(inside rear view mirror, etc.) or ceiling.
●
Do not attach any accessories to the hood, front grille or front bumper that
may obstruct the front camera. Contact your Toyota dealer for details.
●
If a surfboard or other long object is to be mounted on the roof, make sure
that it will not obstruct the front camera.
●
Do not modify the headlights or other lights.
■
If a warning message is displayed on the multi-information display
A system may be temporarily unavailable or there may be a malfunction in
the system.
●
In the following situations, perform the actions specified in the table. When
the normal operating conditions are detected, the message will disappear
and the system will become operational.
If the message does not disappear, contact your Toyota dealer.
Situation
When the area around a sensor is
covered with dirt, moisture (fogged
up, covered with condensation, ice,
etc.), or other foreign matter
4-5. Using the driving support systems
To clean the part of the windshield in
front of the front camera, use the
windshield wipers or the windshield
defogger of the air conditioning sys-
tem (P. 260).
Actions
209
4
Advertisement
Table of Contents
