Warning message
(flashes)
7-2. Steps to take in an emergency
Details/Actions
Indicates a malfunction in the AHB (Automatic
High Beam)
A buzzer also sounds.
Have the vehicle inspected by your Toyota
dealer.
Indicates that the accelerator and brake pedals
are being depressed simultaneously, and the
brake override system is operating.
Release the accelerator pedal and depress
the brake pedal. (P. 161)
The Automatic High Beam switch was pressed
with the low beam headlights turned on.
Turn the high beam headlights on before
pressing the Automatic High Beam switch.
Indicates that the PCS (Pre-Crash Safety sys-
tem) is temporarily unavailable
When conditions improve, the system
resumes operation. If this item is displayed
continuously, have the vehicle inspected
by your Toyota dealer.
Indicates that the PCS (Pre-Crash Safety sys-
tem) is temporarily unavailable
When conditions improve, the system
resumes operation. If this item is displayed
continuously, have the vehicle inspected
by your Toyota dealer.
Indicates that part of the PCS (Pre-Crash Safety
system) sensor is dirty, covered with ice, etc.
Remove any dirt, ice, etc.
367
7