Emergency towing procedure
To have your vehicle towed by another vehicle, the towing eyelet must
be installed to your vehicle. Install the towing eyelet using the follow-
ing procedure.
Take out the wheel nut wrench and towing eyelet. (P. 382, 396)
1
Remove the eyelet cover using
2
a flathead screwdriver.
To protect the bodywork, place a
rag between the screwdriver and
the vehicle body as shown in the
illustration.
Insert the towing eyelet into the
3
hole and tighten partially by
hand.
Tighten down the towing eyelet
4
securely using a wheel nut
wrench or hard metal bar.
Securely attach cables or chains to the towing eyelet.
5
Take care not to damage the vehicle body.
Enter the vehicle being towed and start the hybrid system.
6
If the hybrid system does not start, turn the power switch to ON mode.
Shift the shift position to N and release the parking brake.
7
7-2. Steps to take in an emergency
353
7