After a fuse is replaced
■
If the lights do not turn on even after the fuse has been replaced, a bulb may
●
need replacement. (P. 332)
If the replaced fuse blows again, have the vehicle inspected by your Toyota
●
dealer.
If there is an overload in a circuit
■
The fuses are designed to blow, protecting the wiring harness from damage.
When replacing light bulbs
■
Toyota recommends that you use genuine Toyota products designed for this
vehicle. Because certain bulbs are connected to circuits designed to prevent
overload, non-genuine parts or parts not designed for this vehicle may be
unusable.
WARNING
To prevent system breakdowns and vehicle fire
■
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or
injury.
Never use a fuse of a higher amperage rating than that indicated, or use
●
any other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
●
Never replace a fuse with a wire, even as a temporary fix.
Do not modify the fuses or fuse boxes.
●
Fuse box near the power control unit
■
Never check or replace the fuses as there are high voltage parts and wiring
near the fuse box.
Doing so may cause electric shock, resulting in death or serious injury.
NOTICE
Before replacing fuses
■
Have the cause of electrical overload determined and repaired by your
Toyota dealer as soon as possible.
6-3. Do-it-yourself maintenance
331
6