Tp Cable Termination - Extron electronics MTP 1500RL 15HD RS Series User Manual

Installation, cont'd

TP cable termination

N
Figure 6 details the recommended termination of TP cables
with RJ-45 connectors in accordance with the TIA/EIA T568A or
TIA/EIA T568B wiring standards. Either standard can be used
with CAT 5 cable, but ensure that the same standard is used on
both ends of the cable.
12345678
Insert Twisted
Pair Wires
RJ-45
Connector
Figure 6 — TP cable termination
N
N
The table below shows the MTP RJ-45 pin assignments for video
signals and data communication.
Pin RGBHV
1 Red/V Sync +
2 Red/V Sync -
3 Serial Data +
4 Green +
5 Green -
6 Serial Data -
7 Blue/H Sync +
8 Blue/H Sync -
MTP 1500RL 15HD RS Series • Installation
9
RJ-45 termination must comply with TIA/EIA T568A
or TIA/EIA T568B wiring standards for all connections.
Pins:
T568A
Pin Wire color
1 White-green
2 Green
3 White-orange
4 Blue
5 White-blue
6 Orange
7 White-brown
8 Brown
NOTE
If you are using Enhanced
Skew-Free™ A/V cable, use the
TIA/EIA T568A standard only.
Enhanced Skew-free A/V cable is not recommended for
Ethernet/LAN applications.
DO NOT connect the input RJ-45 to LAN, Ethernet,
outside plant communications, or any telecommunications
networks.
This cable is specially designed for compatibility with
Extron Twisted Pair products that are wired using the
TIA/EIA T568A standard.
RGBS
Red +
Red -
Serial Data +
Green +
Green -
Serial Data -
Blue/C Sync +
Blue/C Sync -
T568B
Wire color
White-orange
Orange
White-green
Blue
White-blue
Green
White-brown
Brown
Composite S-video
No Signal Chroma +
No Signal Chroma -
Serial Data + Serial Data +
Video + Luma +
Video - Luma -
Serial Data - Serial Data -
No Signal No Signal
No Signal No Signal
Component
R-Y +
R-Y -
Serial Data +
Y +
Y -
Serial Data -
B-Y +
B- Y -