Extron electronics MTP 1500RL 15HD RS Series User Manual page 11

Installation, cont'd
f
Receiver DIP switches — Set these DIP switches
for the applicable signal.
•
•
•
•
MTP 1500RL 15HD RS Series • Installation
7
H sync (H+) and V sync (V+) switches —
Set these switches up (ON) for positive
sync or down for negative sync.
Composite sync (CSync), Sync on green (SOG),
and Video switches — Set these switches as shown
in the table below to output the indicated format.
Output Format
RGBHV
RGBS
RGsB
Component video*
S-video
Composite video*
* Input video format must match.
<
= switch is down (off),
End unit switch — Set this End switch up (ON) if either of
the following is true:
a. The receiver being configured is the only receiver
connected to the transmitter.
b. The receiver being configured is the last receiver in a
daisy-chained system.
BI-232 switch — Set this up (ON) for bidirectional or down (off)
for unidirectional communication.
N For best image quality for distances over
1000 feet, set the BI-232 DIP switch to
unidirectional (down).
When daisy-chaining units, this switch
should be set to off for unidirectional
RS-232 communication.
C Sync SOG
< <
> <
< >
< <
< <
< <
>
= switch is up (on)
ON
Video
<
<
<
>
>
>